To Next Page

To Previous Page

Command Manual - Network Protocol

Quidway S2000 Series Ethernet Switches Chapter 1 ARP Configuration Commands

1-1

Chapter 1 ARP Configuration Commands

1.1 ARP Configuration Commands

1.1.1 arp static

Syntax

arp static ip-address mac-address

[

vlan-id

{

interface_type interface_num |

interface_name } ]

undo arp ip-address

View

System view

Parameter

ip-address

: IP address of the ARP mapping entry.

mac-address: MAC address of ARP mapping entry, whose format is H-H-H ( H

indicates a hexadecimal number).

vlan-id: VLAN to which the static ARP entry belongs, which is in the range of 1 to 4094.

interface_name: Port to which the static ARP entry belong, represented with

interface_name

interface_type interface_num. interface_type

is port type and

interface_num

is port number. For details about

interface_type

interface_num

and

interface_name, refer to the Port Command Manual.

Description

Using arp static command, you can configure the static ARP mapping entries in an

ARP mapping table. Using undo arp static command, you can cancel a static ARP

mapping entry from the ARP table

By default, the mapping table of the system ARP is empty and the switch can maintain

its address mapping by means of dynamic ARP.

Note that:

Huawei Quidway S2000 Series User Manual

Questions and Answers: