EasyManuals Logo

Huawei Quidway S2000 Series User Manual

Huawei Quidway S2000 Series
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
Command Manual - Port
Quidway S2000 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
1-4
Table 1-1 Output description of the display interface command
Field Description
Ethernet0/1 current state
The current state of Ethernet port (enabled or disabled)
IP Sending Frames' Format Ethernet frame format
Hardware address Port hardware address
Description Port description character string
The Maximum Transmit Unit Maximum transmit unit
Media type Type of media
loopback not set Port loopback test state
Port hardware type Port hardware type
100Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link
duplex type is autonegotiation
Both the duplex mode and the rate are set to auto-negotiation.
The rate of 100Mbps and the mode of full-duplex are adopted
after negotiating with its peer
Flow-control is not supported Port flow control state
The Maximum Frame Length
Maximum length of the Ethernet frames that can pass through
the port
Broadcast MAX-ratio Port broadcast storm suppression ratio
PVID Port default VLAN ID
Mdi type Cable type
Port link-type Port link type
Tagged VLAN ID The VLANs with packets tagged
Untagged VLAN ID The VLANs with packets untagged
Last 5 minutes output: 0 packets/sec 0
bytes/sec
Last 5 minutes input: 0 packets/sec 0
bytes/sec
The input/output rate and the passing packet number on this
port in the last 5 minutes.
input(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts
input(normal): - packets, - bytes
- broadcasts, - multicasts
input: 0 input errors, 0 runts, 0 giants, -
throttles, 0 CRC
0 frame, - overruns, 0 aborts,
0 ignored, - parity errors
Output(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, 0
pauses
Output(normal): - packets, - bytes
- broadcasts, - multicasts, -
pauses
Output: 0 output errors, 0 underruns, -
buffer failures
- aborts, 0 deferred, 0
collisions, 0 late collisions
- lost carrier, - no carrier
The statistics information of input/output packets and errors on
this port
1.1.4 display lock-port-mac-aging-time
Syntax
display lock-port-mac-aging-time
View
Any view

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S2000 Series and is the answer not in the manual?

Huawei Quidway S2000 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S2000 Series
CategorySwitch
LanguageEnglish

Related product manuals