Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 2 AAA Configuration Commands
2-14
Description
Using state command, you can configure the state of the current ISP domain/ current
user.
By default, after an ISP domain is created, it is in the active state (in ISP domain view).
A local user will be active (in local user view) upon its creation.
In ISP domain view, every ISP can either be in active or block state. If an ISP domain is
configured to be active, the users in it can request for network service, while in block
state, its users cannot request for any network service, which will not affect the users
currently online.
For the related command, see domain.
Example
# Set the current ISP domain huawei163.net to be in the block state. The supplicants in
this domain cannot request for the network service.
[Quidway-isp-huawei163.net] state block
# Set the user huawei1 to be in the block state.
[Quidway-luser-huawei1] state block
2.2 RADIUS Protocol Configuration Commands
2.2.1 data-flow-format
Syntax
data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet { giga-byte
| kilo-byte | mega-byte | one-packet }
undo data-flow-format
View
RADIUS server group view
Parameter
data: Set data unit.
byte: Set 'byte' as the unit of data flow.
giga-byte: Set 'giga-byte' as the unit of data flow.
kilo-byte: Set 'kilo-byte' as the unit of data flow.
mega-byte: Set 'mega-byte' as the unit of data flow.
packet: Set data packet unit.
giga-packet: Set 'giga-packet' as the unit of packet flow.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English