Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 2 System IP Configuration Commands
2-14
Description
Using shutdown command, you can disable the management VLAN interface. Using
undo shutdown command, you can enable the management VLAN interface.
By default, when all the Ethernet ports belonging to the management VLAN are in
down status, the management VLAN interface is also down, i.e. the management
VLAN interface is disabled. When there is one or more Ethernet ports in up status, the
management VLAN interface is also up, i.e. the management VLAN interface is
enabled.
Example
# Enable the management VLAN interface.
[Quidway-Vlan-interface1] undo shutdown
To Next Page
Loading...
