Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-3
Interface: Ethernet0/17
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/18
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/19
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/20
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/21
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/22
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/23
Status: Enabled, Pkts Snd: 11, Pkts Rvd: 12, Pkts Err: 0
Neighbor 1: Aging Time: 170(s)
MAC Address : 00e0-fc00-0003
Port Name : Ethernet0/23
Software Ver: VRP3.10
Device Name : Quidway S3526
Port Duplex : AUTO
Product Ver : 3526-0001C
Interface: Ethernet0/24
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet2/1
Status: Enabled, Pkts Snd: 4, Pkts Rvd: 5, Pkts Err: 0