Huawei Quidway S2000 Series

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
5-4
mib-view: Specify the mib view name.
Description
display snmp-agent mib-view command is used to view the MIB view configuration
information of the Ethernet switch.
Example
# Display the information about the currently configured MIB view.
<Quidway> display snmp-agent mib-view
View name:mv MIB Subtree:internet
Storage-type: nonVolatile -included active
View name:test MIB Subtree:internet
Storage-type: nonVolatile -included active
View name:ViewDefault MIB Subtree:internet
Storage-type: nonVolatile -included active
View name:ViewDefault MIB Subtree:snmpUsmMIB
Storage-type: nonVolatile -excluded active
View name:ViewDefault MIB Subtree:snmpVacmMIB
Storage-type: nonVolatile -excluded active
View name:ViewDefault MIB Subtree:snmpModules.18
Storage-type: nonVolatile -excluded active
The following table describes the output fields.
Table 5-2 Output description of the display snmp-agent mib-view command
Field Description
View name View name
MIB Subtree MIB subtree
storage-type Storage type
included/excluded Permit or forbid access to an MIB object
active Indicate the line state in the table