Huawei Quidway S2000 Series User Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 2 System IP Configuration Commands
2-7
# There are no corresponding routes in the natural mask range (only displaying the
longest matched route). Display the detailed information.
<Quidway> display ip routing-table 169.253.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count:1
**Destination: 169.0.0.0 Mask: 255.0.0.0
Protocol: #Static Preference: -60
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0
Table 2-5 Description of information generated by the command display ip routing-table ip_address
Field Description
Destination Destination address
Mask Mask
Proto Routing protocol
Preference Routing preference
Nexthop Next hop address
Interface
Output interface, through which the data packet destined for the destination network segment
is sent
Vlinkindex Virtual link index

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English