Huawei Quidway S6500 Series User Manual

Operation Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 1 Product Overview
Huawei Technologies Proprietary
1-2
1.2 Function Features
Table 1-1 Function features
Features Description
VLAN
Supports VLAN compliant with IEEE 802.1Q Standard
Supports port-based VLAN
Supports protocol-based VLAN
Supports GARP VLAN Registration Protocol (GVRP)
Supports Super VLAN
STP protocol
Supports Spanning Tree Protocol (STP) / Rapid Spanning Tree
Protocol (RSTP) / Multiple Spanning Tree Protocol (MSTP),
compliant with IEEE 802.1D/IEEE 802.1s Standard
Flow control
Supports IEEE 802.3x flow control (full-duplex)
Supports back-pressure based flow control (half-duplex)
Broadcast
Suppression
Supports Broadcast Suppression
Multicast
Supports GARP Multicast Registration Protocol (GMRP)
Supports Internet Group Management Protocol (IGMP)
Snooping
Supports Internet Group Management Protocol (IGMP)
Supports Protocol-Independent Multicast-Dense Mode
(PIM-DM)
Supports Protocol-Independent Multicast-Sparse Mode
(PIM-SM)
IP routing
Supports the static route
Supports Routing Information Protocol (RIP) V1/v2
Supports Open Shortest Path First (OSPF)
Supports Border Gateway Protocol (BGP)
Supports Intermediate System-to-Intermediate System
intra-domain routing information exchange protocol (IS-IS)
Supports IP routing policy
DHCP Relay Supports Dynamic Host Configuration Protocol (DHCP) Relay
PoE
Supports Power Over Ethernet (PoE) (Only the switches with
the software versions of Release 3000 series support this
feature)
Link aggregation
Supports link aggregation through manual configuration
Supports dynamic LACP (Link Aggregation Control Protocol)
aggregation (IEEE802.3ad standard)
Supports static LACP aggregation (IEEE802.3ad standard)
Mirror Supports the port-based mirror

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English