Huawei Quidway S6500 Series User Manual

Operation Manual - Security
Quidway S6500 Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-15
Operation Command
Restore IP address and port number of second
RADIUS authentication/authorization server to the
default values.
undo secondary
authentication
By default, as for the newly created RADIUS scheme, the IP address of the primary
authentication server is 0.0.0.0, and the UDP port number of this server is 1812; as for
the "system" RADIUS scheme created by the system, the IP address of the primary
authentication server is 127.0.0.1, and the UDP port number is 1645.
As the authorization information from the RADIUS server is sent to RADIUS clients in
authentication response packets, so you do not need to specify a separate
authorization server.
In real networking environments, you may specify two RADIUS servers as primary and
secondary authentication/authorization servers respectively, or specify one server to
function as both.
The RADIUS service port settings on Quidway Series Ethernet Switches are supposed
to be consistent with the port settings on RADIUS server. Normally, the
authentication/authorization service port is 1812.
2.3.3 Configuring RADIUS Accounting Servers and the Related Attributes
I. Configuring RADIUS Accounting Servers
You can use the following commands to configure the IP address and port number for
RADIUS accounting servers.
Perform the following configurations in RADIUS scheme view.
Table 2-18 Configuring RADIUS Accounting servers
Operation Command
Set IP address and port number of primary
RADIUS accounting server.
primary accounting
ip-address [ port-number ]
Restore IP address and port number of primary
RADIUS accounting server to the default values.
undo primary accounting
Set IP address and port number of second
RADIUS accounting server.
secondary accounting
ip-address [ port-number ]
Restore IP address and port number of second
RADIUS accounting server to the default values.
undo secondary accounting
By default, as for the newly created RADIUS scheme, the IP address of the primary
accounting server is 0.0.0.0, and the UDP port number of this server is 1813; as for the

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English