Huawei Quidway S6500 Series User Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 6 RMON Configuration
Huawei Technologies Proprietary
6-2
6.2 Configure RMON
RMON configuration includes:
z Add/Delete an Entry to/from the Event Table
z Add/Delete an Entry to/from the Alarm Table
z Add/Delete an Entry to/from the extended RMON alarm table
z Add/Delete an Entry to/from the History Control Table
z Add/Delete an Entry to/from the Statistics Table
6.2.1 Add/Delete an Entry to/from the Event Table
RMON alarm management can monitor the specified alarm variables such as the
statistics on a port. When a value of the monitored data exceeds the defined threshold,
an alarm event will be generated. Generally, the event will be recorded in the device log
table and a Trap message will be sent to NMS. The events are defined in the event
management. The alarm management includes browsing, adding and deleting the
alarm entries.
You can use the following commands to add/delete an entry to/from the alarm table.
Perform the following configuration in system view.
Table 6-1 Add/Delete an entry to/from the alarm table
Operation Command
Add an entry to the alarm
table.
rmon alarm entry-number alarm-variable interval
{ delta | absolute } rising-threshold
threshold-value1 event-entry1 falling-threshold
threshold-value2 event-entry2 [ owner text ]
Delete an entry from the
alarm table.
undo rmon alarm entry-number
6.2.2 Add/Delete an Entry to/from the Alarm Table
6.2.3 Add/Delete an Entry to/from the Extended RMON Alarm Table
RMON event management defines the event ID and the handling of the event by
keeping logs, sending Trap messages to NMS or performing the both at the same time.
You can use the following commands to add/delete an entry to/from the event table.
Perform the following configuration in system view.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English