Huawei Quidway S6500 Series User Manual

Operation Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 1 VRRP Configuration
Huawei Technologies Proprietary
1-8
Table 1-7 Configure VRRP timer
Operation Command
Configure VRRP timer
vrrp vrid virtual-router-ID timer advertise
adver-interval
Clear VRRP timer undo vrrp vrid virtual-router-ID timer advertise
By default, adver-interval is configured to be 1.
1.2.8 Configuring the Switch to Track a Specified Interface
VRRP interface track function has expanded the backup function. Backup is provided
not only to the interface where the virtual router resides, but also to some other
malfunctioning switch interface. By implementing the following command you can
track some interface. If the interface which is tracked is down, the priority of the
switch including the interface will reduce automatically by the value specified by
value-reduced, thus resulting in comparatively higher priorities of other switches
within the virtual router, one of which will turn to master switch so as to track this
interface.
Perform the following configuration in VLAN interface view and Ethernet interface
view.
Table 1-8 Configure the switch to track a specified interface
Operation Command
Configure to track a
specified interface
vrrp vrid virtual-router-ID track interface-type
interface-num [ reduced value-reduced ]
Stop tracking the specified
interface
undo vrrp vrid virtual-router-ID track
interface-type interface-num [ reduced
value-reduced ]
By default, value-reduced is 10.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English