Huawei Quidway S6500 Series User Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-2
4.1.4 Set the Summer Time
You can set the name, starting and ending time of the summer time.
Perform the following operations in the user view.
Table 4-4 Setting the summer time
Operation Command
Set the name and range of the summer
time
clock summer-time zone_name
{ one-off | repeating } start-time
start-date end-time end-date offset-time
Remove the setting of the summer time
undo clock summer-time
By default, the summer time is not set.
4.2 Display the State and Information of the System
The display commands can be classified as follows according to their functions.
z Commands for displaying the system configuration information
z Commands for displaying the system running state
z Commands for displaying the system statistics information
For the display commands related to each protocols and different ports, refer to the
relevant chapters. The following display commands are used for displaying the system
state and the statistics information.
Perform the following operations in any view.
Table 4-5 The display commands of the system
Operation Command
Display the system clock
display clock
Display the system version
display version
Display the terminal user display users [ all ]
Display the saved-configuration
display saved-configuration
Display the current-configuration
display current-configuration [ controller |
interface interface-type [ interface-number ] |
configuration [ acl-adv | ospf | system |
timerange | user-interface ] ] [ | { begin |
exclude | include } regular-expression ]
Display the state of the debugging
display debugging [ interface
{ interface-name | interface-type
interface-number } ] [ module-name ]

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English