Huawei Quidway S6500 Series - Huawei

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Table of Contents
Huawei Technologies Proprietary
i
Table of Contents
Chapter 1 ACL Configuration....................................................................................................... 1-1
1.1 Brief Introduction to ACL.................................................................................................... 1-1
1.1.1 ACL Overview ......................................................................................................... 1-1
1.1.2 ACL Supported by Ethernet Switch......................................................................... 1-3
1.2 Configure ACL ................................................................................................................... 1-4
1.2.1 Configure Time-Range............................................................................................1-4
1.2.2 Select ACL mode .................................................................................................... 1-5
1.2.3 Define ACL.............................................................................................................. 1-5
1.2.4 Activate ACL.......................................................................................................... 1-10
1.2.5 Display and Debug ACL........................................................................................ 1-11
1.3 ACL Configuration Example ............................................................................................ 1-12
1.3.1 Advanced ACL Configuration Example................................................................. 1-12
1.3.2 Basic ACL Configuration Example........................................................................ 1-13
1.3.3 Link ACL Configuration Example.......................................................................... 1-14
Chapter 2 QoS Configuration....................................................................................................... 2-1
2.1 QoS Overview.................................................................................................................... 2-1
2.1.1 Traffic ...................................................................................................................... 2-1
2.1.2 Traffic Classification................................................................................................ 2-1
2.1.3 Packet Filter ............................................................................................................2-2
2.1.4 Traffic Policing......................................................................................................... 2-2
2.1.5 Bandwidth Assurance .............................................................................................2-2
2.1.6 Port traffic limit......................................................................................................... 2-2
2.1.7 Redirection .............................................................................................................. 2-2
2.1.8 Traffic Priority .......................................................................................................... 2-3
2.1.9 Queue Scheduling................................................................................................... 2-3
2.1.10 Traffic Mirroring..................................................................................................... 2-4
2.1.11 Traffic Counting..................................................................................................... 2-4
2.1.12 RED....................................................................................................................... 2-4
2.2 QoS Configuration ............................................................................................................. 2-5
2.2.1 Setting Port Priority ................................................................................................. 2-7
2.2.2 Setting Port Mirroring .............................................................................................. 2-8
2.2.3 Setting Priority-Output Queue Mapping and Queue Scheduling ............................ 2-9
2.2.4 Entering QoS View................................................................................................ 2-12
2.2.5 Setting Traffic Limit ............................................................................................... 2-13
2.2.6 Setting Line Limit................................................................................................... 2-18
2.2.7 Setting Traffic Bandwidth ...................................................................................... 2-18
2.2.8 Setting Traffic Redirection..................................................................................... 2-19