Huawei Quidway S6500 Series User Manual

Operation Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 2 HA Configuration
Huawei Technologies Proprietary
2-3
Perform the following configuration in user view.
Table 2-2 Perform the master-slave switchover manually
Operation Command
Perform the master-slave switchover manually slave switchover
2.2.3 Enabling/Disabling Automatic Synchronization
S6506R supports automatic synchronization. The active system stores its
configuration file and backup the configuration file to the slave system simultaneously
when the master's configuration file is modified, ensuring the consistency of the
configurations of the active system and slave system.
You can enable/disable automatic synchronize of the S6506R.
Perform the following configuration in system view.
Table 2-3 Enable/disable automatic synchronization
Operation Command
Enable automatic synchronization slave auto-update config
Disable automatic synchronization undo slave auto-update config
By default, the automatic synchronization is enabled.
2.2.4 Synchronizing the Configuration File of the System Manually
The system can synchronize the configuration files on the master and slave borads
automatically. If you want to synchronize them yourself, you can do it manually by
using the command below.
Perform the following configuration in user view.
Table 2-4 Synchronize the configuration file manually
Operation Command
Synchronize the configuration file manually slave update configuration
This operation can backup the configuration file to the slave board only if a slave
system is available. The configuration file will be fully copied once at every time the
operation is executed.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English