Huawei Quidway S6500 Series User Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 5 SNMP Configuration
Huawei Technologies Proprietary
5-8
5.3.12 Create/Update View Information or Deleting a View
You can use the following commands to create, update the information of views or
delete a view.
Perform the following configuration in system view.
Table 5-13 Create/Update view information or deleting a view
Operation Command
Create/Update view information
snmp-agent mib-view { included |
excluded } view-name oid-tree
Delete a view undo snmp-agent mib-view view-name
5.3.13 Set the Size of SNMP Packet Sent/Received by an Agent
You can use the following commands to set the size of SNMP packet sent/received by
an agent.
Perform the following configuration in system view.
Table 5-14 Set the size of SNMP packet sent/received by an agent
Operation Command
Set the size of SNMP packet
sent/received by an agent
snmp-agent packet max-size
byte-count
Restore the default size of SNMP packet
sent/received by an agent
undo snmp-agent packet max-size
The agent can receive/send the SNMP packets of the sizes ranging from 484 to 17940,
measured in bytes. By default, the size of SNMP packet is 2000 bytes.
5.3.14 Disable SNMP Agent
To disable SNMP Agent, please Perform the following configuration in system view.
Table 5-15 Disable snmp agent
Operation Command
Disable snmp agent undo snmp-agent
If user disable NMP Agent, it will be enabled whatever snmp-agent command is
configured thereafter.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English