Huawei Quidway S6500 Series - Displaying and Debugging SSH

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 8 SSH Terminal Services
Huawei Technologies Proprietary
8-13
Figure 8-8 SSH client interface
1) Key in correct username and password and log into SSH connection.
2) Log out of SSH connection with the logout command.
8.1.4 Displaying and Debugging SSH
Run the display command in any view to view the running of SSH and further to check
configuration result.
Run the debugging command to debug the SSH.
Please perform the following configurations in any view.
Table 8-10 Display SSH information
Operation Command
Display host and server public
keys
display rsa local-key-pair public
Display client RSA public key display rsa peer-public-key [ brief | name keyname ]
Display SSH state information
and session `
display ssh server { status | session }
Display SSH user information display ssh user-information [ username ]
Enable SSH debugging debugging ssh server { VTY index | all }
Disable SSH debugging undo debugging ssh server { VTY index | all }