Huawei Quidway S6500 Series User Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 1 ACL Configuration
Huawei Technologies Proprietary
1-10
1.2.4 Activate ACL
The defined ACL can be active after activated globally on the switch. This function is
used to activate the ACL filtering or classify the data transmitted by the hardware of
switch.
You can use the following command to activate the defined ACL.
Perform the following configuration in Qos view.
I. Configuration on A Type Card
Table 1-9 Activate ACL
Operation Command
Activate an ACL
packet-filter { inbound | outbound } { ip-group
{ acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }
[ not-care-for-interface ]
Deactivate an ACL
undo packet-filter { inbound | outbound } { ip-group
{ acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }
 Note:
A type card includes LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA and
LS81GT8UA cards.
II. Configuration on the Cards except A Type Ones
Table 1-10 Activate ACL
Operation Command
Activate an ACL
packet-filter inbound { user-group { acl-number |
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] }* }
Deactivate an ACL
undo packet-filter inbound { user-group { acl-number |
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] }* }

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English