Huawei Quidway S6500 Series User Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 QoS Configuration
Huawei Technologies Proprietary
2-18
2.2.6 Setting Line Limit
Line limit refers to rate limit based on the port, that is, limiting the total rate at the port.
The adjustment step for line rate of S6500 series switches is 1Mbps.
Please perform the following configurations in QoS view.
Table 2-14 Setting line rate
Operation Command
Set line limit line-rate [ kbps ] target-rate
Remove line limit
undo line-rate
 Note:
Only the cards except A type ones support the port rate limitation.
You can set line limit at a single port.
2.2.7 Setting Traffic Bandwidth
You can set desired traffic bandwidth to ensure target services.
Please perform the following configurations in QoS view.
Table 2-15 Setting traffic bandwidth
Operation Command
Set traffic bandwidth
traffic-bandwidth outbound { ip-group { acl-number |
acl-name } [ rule rule ] | link-group { acl-number | acl-name }
[ rule rule ] } min-guaranteed-bandwidth
max-guaranteed-bandwidth weight
Remove traffic
bandwidth setting
undo traffic-bandwidth outbound { ip-group { acl-number
| acl-name } [ rule rule ] | link-group { acl-number |
acl-name } [ rule rule ] }
 Note:
The cards except A type ones do not support this command.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English