Huawei Quidway S6500 Series User Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management
Huawei Technologies Proprietary
1-7
Table 1-11 Configuration of the switch as FTP server
Device Configuration Default Description
Start FTP server.
FTP server is
disabled.
You can view the configuration
information of FTP server with
the ftp-server command.
Configure
authentication and
authorization for FTP
server.
-
Configure username, password
and authorized directory for FTP
users.
Switch
Configure running
parameters for FTP
server.
Configure timeout time value for
FTP server.
PC
Log into the switch
from FTP client.
- -
Caution:
The prerequisite for normal FTP function is that the switch and PC are reachable.
1.3.2 Enable/Disable FTP Server
You can use the following commands to enable/disable the FTP server on the switch.
Perform the following configuration in system view.
Table 1-12 Enable/Disable FTP Server
Operation Command
Enable the FTP server
ftp server enable
Disable the FTP server
undo ftp server
FTP server supports one user to access at the same time. A remote FTP client sends
request to the FTP server. Then, the FTP server will carry out the corresponding
operation and return the result to the client.
By default, FTP server is disabled.
1.3.3 Configure the FTP Server Authentication and Authorization
The authentication information of FTP server includes the username and the password
of the FTP clients. The authorization information of FTP server includes the top working

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English