Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management
Huawei Technologies Proprietary
1-10
Caution:
If the free space of the flash memory is not enough, you need to first delete the existing
programs in the flash memory and then upload the new ones.
# Type in the right command in user view to establish FTP connection, then correct
username and password to log into the FTP server.
<Quidway>
ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Type in the authorized directory of the FTP server.
[ftp] cd switch
# Use the put command to upload the vrpcfg.txt to the FTP server.
[ftp] put vrpcfg.txt
# Use the get command to download the switch.app from the FTP server to the flash
directory on the FTP server.
[ftp] get switch.app
# Use the quit command to release FTP connection and return to user view.
[ftp] quit
<Quidway>
# Use the boot boot-loader command to specify the downloaded program as the
application at the next login and reboot the switch.
<Quidway> boot boot-loader primary switch.app
<Quidway> reboot
1.3.8 FTP server configuration example
I. Networking requirement
Switch serves as FTP server and the remote PC as FTP client. The configuration on
FTP server: Configure a FTP user named as switch, with password hello and with read
To Next Page
Loading...
Need help?
General
