Huawei Quidway S6500 Series User Manual

Operation Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 2 HA Configuration
Huawei Technologies Proprietary
2-4
2.3 Displaying and Debugging HA
After the above configuration, execute the display command in any view to display
the running of the ACL configuration, and to verify the effect of the configuration.
Execute the debugging command in user view to enable HA module debugging
function or view the backup state to monitor the switchover process.
Perform the following configuration in any view.
Table 2-5 Display and debug HA
Operation Command
Display the status of the master/slave
board
display switchover state [ slot-id ]
Enable the debugging information
output of the HA module
debugging ha { all | event | message |
state }
Disable the debugging information
output of the HA module
undo debugging ha { all | event |
message | state }

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English