EasyManuals Logo

Huawei Quidway S6500 Series User Manual

Huawei Quidway S6500 Series
647 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #475 background imageLoading...
Page #475 background image
Operation Manual - Security
Quidway S6500 Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-22
case, you have to remove the domain name before sending the username to the
RADIUS server. The following command of switch decides whether the username to be
sent to RADIUS server carries ISP domain name or not.
Perform the following configurations in RADIUS scheme view.
Table 2-29 Setting the username format transmitted to the RADIUS server
Operation Command
Set Username Format Transmitted to
RADIUS Server
user-name-format { with-domain |
without-domain }
 Note:
If a RADIUS scheme is configured not to allow usernames including ISP domain names,
the RADIUS scheme shall not be simultaneously used in more than one ISP domain.
Otherwise, the RADIUS server will regard two users in different ISP domains as the
same user by mistake, if they have the same username (excluding their respective
domain names.)
By default, as for the newly created RADIUS scheme, the username sent to RADIUS
servers includes an ISP domain name; as for the "system" RADIUS scheme created by
the system, the username sent to RADIUS servers excludes the ISP domain name.
2.3.11 Setting the Unit of Data Flow that Transmitted to the RADIUS Server
The following command defines the unit of the data flow sent to RADIUS server.
Perform the following configurations in RADIUS scheme view.
Table 2-30 Setting the unit of data flow transmitted to the RADIUS server
Operation Command
Set the unit of data flow
transmitted to RADIUS server
data-flow-format data { byte | giga-byte |
kilo-byte | mega-byte } packet { giga-packet |
kilo-packet | mega-packet | one-packet }
Restore the unit to the default
setting
undo data-flow-format
By default, the default data unit is byte and the default data packet unit is one packet.
2.3.12 Configuring the Local RADIUS Authentication Server
RADIUS service, which adopts authentication/authorization/accounting servers to
manage users, is widely used in Quidway S6500 series switches. Besides, local

Table of Contents

Other manuals for Huawei Quidway S6500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S6500 Series and is the answer not in the manual?

Huawei Quidway S6500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S6500 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals