Huawei Quidway S6500 Series User Manual

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 6
PIM Configuration
Huawei Technologies Proprietary
6-13
6.3.14 Configuring C-RP Policy
To prevent C-RP spoofing, C-RP policy can be configured to specify the range of valid
C-RPs and of groups served by each C-RP.
Perform the following configurations in PIM view.
Table 6-16 Configuring C-RP policy
Operation Command
Configure C-RP policy
crp-policy acl-number
Remove C-RP policy
undo crp-policy
For the details of the crp-policy command, refer to Command Manual.
6.3.15 Clearing PIM Routing Entries
See 6.2.8 Clearing PIM Routing Entries.
6.3.16 Clearing PIM Neigthbore
See 6.2.9 Clearing PIM Neighbors.
6.4 Displaying and Debugging PIM Configuration
After the above configuration, you can use the display commands in any view to display
the running information of PIM, and to verify the effect of the configuration.
Execute the debugging commands in user view for the debugging of PIM.
Table 6-17 Displaying and debugging PIM configuration
Operation Command
Display PIM multicast routing
table
display pim routing-table [ { { *g [ group-address
[ mask { mask-length | mask } ] ] | **rp [ rp-address
[ mask { mask-length | mask } ] ] } |
{
group-address [ mask
{
mask-length | mask } ] |
source-address [ mask
{
mask-length | mask } ] }
*
}
| incoming-interface { interface-type
interface-num | interface-name | null } |
{ dense-mode | sparse-mode } ] *
Display PIM interface
information
display pim interface [ interface-type
interface-number ]
Display PIM neighbors
information
display pim neighbor [ interface interface-type
interface-number ]
Display BSR information
display pim bsr-info
Display RP information display pim rp-info [ group-address ]

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English