Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 IGMP Configuration
Huawei Technologies Proprietary
5-7
Table 5-9 Configuring a router to join specified multicast group
Operation Command
Configure a router to join specified
multicast group (VLAN interface
view)
igmp host-join group-address port
{ interface_type interface_ num |
interface_name } [ to { interface_type
interface_ num | interface_name } ]
Quit from specified multicast group
(VLAN interface view)
undo igmp host-join group-address port
{ interface_type interface_ num |
interface_name } [ to { interface_type
interface_ num | interface_name } ]
Configure a router to join specified
multicast group (Ethernet port view)
igmp host-join group-address vlan vlanid
Quit from specified multicast group
(Ethernet port view)
undo igmp host-join group-address vlan
vlanid
By default, a router joins no multicast group.
5.2.10 Limiting Multicast Groups An Interface Can Access
A multicast router learns whether there are members of a multicast group on the
network via the received IGMP membership message. A filter can be set on an
interface so as to limit the range of allowed multicast groups.
Perform the following configuration in corresponding view.
Table 5-10 Limiting multicast groups an interface can access
Operation Command
Limit the range of allowed multicast
groups on current interface
(Interface view)
igmp group-policy acl-number [ 1 | 2 | port
{ interface_type interface_ num |
interface_name } [ to { interface_type
interface_ num | interface_name } ] ]
Remove the filter set on the interface
(Interface view)
undo igmp group-policy [ port
{ interface_type interface_ num |
interface_name } [ to { interface_type
interface_ num | interface_name } ] ]
Limit the range of allowed multicast
groups on current interface (Ethernet
port view)
igmp group-policy acl-number vlan vlanid
Remove the filter set on the interface
(Ethernet port view)
undo igmp group-policy vlan vlanid
By default, no filter is configured, that is, all multicast groups are allowed on the
interface.