Huawei Quidway S6500 Series User Manual

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 6
PIM Configuration
Huawei Technologies Proprietary
6-15
III. Configuration procedure
Only configuration steps for Lanswitch 1 are listed here and those for Lanswitch 2 and
Lanswitch 3 are in similar way.
# ENABLING the multicast routing protocol.
[Quidway] multicast routing-enable
# ENABLING IGMP and PIM-DM.
[Quidway] vlan 10
[Quidway-vlan10] port ethernet 3/0/2 to ethernet 3/0/3
[Quidway-vlan10] quit
[Quidway] vlan 11
[Quidway-vlan11] port ethernet 3/0/4 to ethernet 3/0/5
[Quidway-vlan11] quit
[Quidway] vlan 12
[Quidway-vlan12] port ethernet 3/0/6 to ethernet 3/0/7
[Quidway-vlan12] quit
[Quidway] interface vlan-interface 10
[Quidway-vlan-interface10] ip address 1.1.1.1 255.255.0.0
[Quidway-vlan-interface10] igmp enable
[Quidway-vlan-interface10] pim dm
[Quidway-vlan-interface10] quit
[Quidway] interface vlan-interface 11
[Quidway-vlan-interface11] ip address 2.2.2.2 255.255.0.0
[Quidway-vlan-interface11] igmp enable
[Quidway-vlan-interface11] pim dm
[Quidway-vlan-interface11] quit
[Quidway] interface vlan-interface 12
[Quidway-vlan-interface12] ip address 3.3.3.3 255.255.0.0
[Quidway-vlan-interface12] igmp enable
[Quidway-vlan-interface12] pim dm
6.5.2 PIM-SM Configuration Example
I. Networking requirement
In practice, it can be assumed that all Ethernet switches are reahable to each other.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English