Operation Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 2 Logging in Switch
Huawei Technologies Proprietary
2-7
Figure 2-9 Setting the dialed number
Figure 2-10 Dialing on the remote PC
Step 5: Enter the preset login password on the remote terminal emulator and wait for
the prompt such as <Quidway>. Then you can configure and manage the switch. Enter
“?” to get the immediate help. For details of specific commands, refer to the following
chapters.
Note:
By default, when a Modem user logs in, he can access the commands at Level 0.
To Next Page
Loading...
Need help?
General
