Huawei Quidway S6500 Series User Manual

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 8 Route Capacity Configuration
Huawei Technologies Proprietary
8-2
8.2 Route Capacity Configuration
Route capacity configuration includes:
z Setting the lower limit and the safety value of the Ethernet switch memory
z Enabling/Disabling the Ethernet switch to recover the disconnected routing
protocol automatically
8.2.1 Setting the lower limit and the safety value of the Ethernet switch
memory
When the Ethernet switch memory is equal to or lower than the lower limit, BGP and
OSPF will be disconnected. BGP routes and OSPF routes will be removed from the
routing table..
Perform the following configurations in system view.
Table 8-1 Setting the lower limit and the safety value of the Ethernet switch memory
Operation Command
Set the lower limit and the safety value
of the Ethernet switch memory
simultaneously
memory { safety safety-value | limit
limit-value }*
Restore the lower limit and the safety
value of the Ethernet switch memory to
the default value
undo memory [ safety | limit ]
The lower limit value set for the memory must be smaller than the safety value.
8.2.2 Enabling/Disabling the Ethernet switch to Recover the Disconnected
Routing Protocol Automatically
If memory automatic restoration function of an Ethernet switch is disabled, connection
of routing protocols will not be restored even if the free memory restores to the safety
value. Therefore, this configuration should be performed cautiously.
Perform the following configurations in system view.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English