Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 1 ACL Configuration
Huawei Technologies Proprietary
1-15
 Note:
In the following configurations, only the commands related to ACL configurations are
listed.
1) Define the time range
# Define time range from 8:00 to 18:00.
[Quidway] time-range huawei 8:00 to 18:00 daily
2) Select ACL mode
# Select link-based ACL mode.
[Quidway] acl mode link-based
3) Define the ACL for packet which source MAC address is 00e0-fc01-0101 and
destination MAC address is 00e0-fc01-0303.
# Enter the named link ACL, named as traffic-of-link.
[Quidway] acl name traffic-of-link link
# Define the rules for packet which source MAC address is 00e0-fc01-0101 and
destination MAC address is 00e0-fc01-0303.
[Quidway-acl-link-traffic-of-link] rule 1 deny ip ingress 00e0-fc01-0101 egress
00e0-fc01-0303 time-range huawei
4) Activate ACL.
# Activate the ACL traffic-of-link .
[Quidway-Ethernet2/0/1] qos
[Quidway-qoss-Ethernet2/0/1] packet-filter inbound link-group traffic-of-link
To Next Page
Loading...
Need help?
General
