Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 QoS Configuration
Huawei Technologies Proprietary
2-10
Table 2-6 Mapping between IP priority levels and outbound queues
IP priority level Queue
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
Table 2-7 Mapping between DSCP priority levels and outbound queues
DSCP value Name (type A LPUs)
Name (LPUs excluding
the type A LPUs)
Queue
0~7 be(0) be(0) 0
8~15
cs1(8), af1(10) cs1(8), af11(10), af12(12),
af13(14)
1
16~23
cs2(16), af2(18) cs2(16), af21(18), af22(20),
af23(22)
2
24~31
cs3(24), af3(26) cs3(24), af31(26), af32(28),
af33(30)
3
32~39
cs4(32), af4(34) cs4(32), af41(34) ,
af42(36) , af43(38)
4
40~47 cs5(40), ef(46) cs5(40), ef(46) 5
47~55 cs6(48) cs6(48) 6
56~63 cs7(56) cs7(56) 7
I. Setting mapping list for 802.1p priority
You cannot modify the mapping between local priority levels and outbound queues, but
you can change the mapping between 802.1p and local priority levels. Then the
mapping between 802.1p priority levels and outbound queues change.
Please perform the following configurations in system view.