Huawei Quidway S6500 Series User Manual

Operation Manual - STP
Quidway S6500 Series Ethernet Switches Chapter 3 Digest Snooping
Huawei Technologies Proprietary
3-2
Operation Command Remark
Enable digest
snooping on the
interface
stp
config-digest-snooping
Required. Digest snooping is
disabled by default
Quit Ethernet
interface view
quit
—
Enable digest
snooping globally
stp
config-digest-snooping
Required. Digest snooping is
disabled by default
Display current
configuration
information
display
current-configuration
This command can be executed
in any view
 Note:
z You must enable digest snooping on an interface first before enabling it globally.
z Digest snooping is unnecessay if the interconnected switches are from the same
vendor.
z To enable digest snooping, the interconneted switches must be configured with the
same settings.
z To enable digest snooping, all interfaces in a MSTP domain used to connect other
switches must have digest snooping enabled.
z Do not enable digest snooping on border interfaces of an MSTP domain.
z To change domain configuration, be sure to disable digest snooping first to prevent
broadcast storm.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English