Huawei Quidway S6500 Series - Page 433

Operation Manual - STP
Quidway S6500 Series Ethernet Switches Chapter 4 The Rapid Transition Feature
Huawei Technologies Proprietary
4-3
The upstream switch has proprietary protocols concerning spanning tree employed, the
mechanism for its designated port to implement sate transition is similar to that of RSTP.
Port 1 is the designated port.
The downstream switch has MSTP employed. Port 2 is the root port.
Port 1
Quidw ay Switch
Sw itch coming from other manufacturers
Port 2
Port 1
Quidw ay Switch
Sw itch coming from other manufacturers
Port 2
Figure 4-3 Network diagram for rapid transition configuration
4.2.2 Configuration procedure
I. Configuring rapid transition in system view
Table 4-1 Configure rapid transition in system view
Operation step Command Description
Enter system view
system-view
—
Enable rapid
transition
stp interface interface-type
interface-number
no-agreement-check
Required
Rapid transition is
disabled on a port by
default.
II. Configuring rapid transition in Ethernet port view
Table 4-2 Configure rapid transition in Ethernet port view
Operation step Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—