Huawei Quidway S6500 Series User Manual

Operation Manual - Security
Quidway S6500 Series Ethernet Switches Table of Contents
Huawei Technologies Proprietary
1-2
2.3.5 Setting Retransmission Times of RADIUS Request Packet ................................. 2-18
2.3.6 Configuring the User Re-authentication at Reboot ............................................... 2-19
2.3.7 Setting the Supported Type of the RADIUS Server.............................................. 2-20
2.3.8 Setting the RADIUS Server State ......................................................................... 2-20
2.3.9 Configuring the Quiet Time Interval ...................................................................... 2-21
2.3.10 Setting the Username Format Transmitted to the RADIUS Server .................... 2-21
2.3.11 Setting the Unit of Data Flow that Transmitted to the RADIUS Server............... 2-22
2.3.12 Configuring the Local RADIUS Authentication Server ........................................ 2-22
2.3.13 Configuring Source Address for RADIUS Packets Sent by NAS........................ 2-23
2.3.14 Setting the Timers of the RADIUS Server........................................................... 2-24
2.4 Displaying and Debugging AAA and RADIUS Protocol................................................... 2-26
2.5 AAA and RADIUS Protocol Configuration Example ........................................................ 2-27
2.5.1 Configuring the FTP/Telnet User Authentication at a Remote RADIUS Server ... 2-27
2.5.2 Configuring the FTP/Telnet User Authentication at Local..................................... 2-29
2.5.3 Dynamic VLAN with RADIUS Server Configuration Example .............................. 2-30
2.6 AAA and RADIUS Protocol Fault Diagnosis and Troubleshooting.................................. 2-31

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English