Huawei Quidway S6500 Series User Manual

Operation Manual - Security
Quidway S6500 Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-10
Table 2-11 Setting the password display mode for local users
Operation Command
Set the password display mode for all
local users
local-user password-display-mode
{ cipher-force | auto }
Cancel the password display mode for
local users
undo local-user
password-display-mode
Where, auto means that the password display mode will be the one specified by the
user at the time of configuring password (see the password command in the following
table for reference), and cipher-force means that the password display mode of all the
accessing users must be in cipher text.
Perform the following configurations in local user view.
Table 2-12 Setting/removing the attributes concerned with a specified user
Operation Command
Set the password of a specific user
password { simple | cipher } password
Cancel the password of the specific user
undo password
Set the state of a specific user
state { active | block }
Set the type of service available for the
user
service-type { ftp [ ftp-directory
directory ] | lan-access | { ssh | telnet |
terminal }* [ level level ] }
Cancel the type of service available for
the user
undo service-type { ftp [ ftp-directory ]
| lan-access | { ssh | telnet |
terminal }* }
Set the priority level of the user
level level
Restore the default priority level
undo level
Set the attributes of the local user
attribute { ip ip-address | mac
mac-address | idle-cut second |
access-limit max-user-number | vlan
vlan_id | location { nas-ip ip-address
port portnum | port portnum } }*
Cancel the attributes of the local user
undo attribute { ip | mac | idle-cut |
access-limit | vlan | location }*
By default, no service is authorized to users. The default user priority level is 0.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English