Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 8 SSH Terminal Services
Huawei Technologies Proprietary
8-10
II. Specifying server IP address
Start PuTTY program and the client configuration interface pops up.
Figure 8-5 SSH client configuration interface (1)
In the Host Name (or IP address) text box key in the IP address of the switch, for
example, 10.110.28.10. You can also input the IP address of an interface in UP state,
but its route to SSH client PC must be reachable.
III. Selecting SSH protocol
Select SSH for the Protocol item.
IV. Choosing SSH version
Click the left menu [Category/Connection/SSH] to enter the interface shown in following
figure:
To Next Page
Loading...
