Huawei Quidway S6500 Series User Manual

Operation Manual - PoE
Quidway S6500 Series Ethernet Switches Chapter 2
PoE PSU Supervision Configuration
Huawei Technologies Proprietary
2-5
II. Network diagram
Ethernet3/0/1~Ethernet3/0/48
IP Phone
Network
S6506
IP Phone
IP Phone
IP Phone
Ethernet3/0/1~Ethernet3/0/48
IP Phone
Network
S6506
IP Phone
IP Phone
IP Phone
Figure 2-1 Network diagram for PoE supervision configuration
III. Configuration procedure
# Enter the system view.
<Quidway> system-view
# Enable PoE on the board in slot 3.
[Quidway] poe enable slot 3
# Set the overvoltage alarm threshold of AC input for the PoE PSUs to 264.0 V.
[Quidway] poe-power input-thresh upper 264.0
# Set the undervoltage alarm threshold of AC input for the PoE PSUs to 181.0 V.
[Quidway] poe-power input-thresh lower 181.0
# Set the overvoltage alarm threshold of DC output for the PoE PSUs to 55.0 V.
[Quidway] poe-power output-thresh upper 55.0
# Set the undervoltage alarm threshold of DC output for the PoE PSUs to 47.0 V.
[Quidway] poe-power output-thresh lower 47.0

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English