Connecting Power to a DC-Powered MX2020 Router with Power Distribution Modules (-48
V) | 317
Connecting Power to a DC-Powered MX2000 Router with DC Power Distribution Modules (240
V China) | 321
Connecting an MX2000 DC Router Power Distribution Module (-48 V) Cable | 322
Connecting an MX2000 DC Router Power Distribution Module (240 V China) Cable | 325
Powering On the DC-Powered (-48 V) MX2020 Router | 327
Powering On the DC-Powered (240 V China) MX2000 Router | 329
Powering On a Three-Phase AC-Powered MX2000 Router | 331
Connecting the MX2020 to the Network | 333
Connecting the MX2020 Router to Management and Alarm Devices | 333
Connecting the MX2020 Router to a Network for Out-of-Band Management | 333
Connecting the MX2020 Router to a Console or Auxiliary Device | 334
Connecting an MX2020 Router to an External Alarm-Reporting Device | 336
Connecting the MX2020 Router to a Network for Out-of-Band Management | 337
Connecting the MX2020 Router to a Console or Auxiliary Device | 338
Connecting an MX2020 Router to an External Alarm-Reporting Device | 340
Connecting the Alarm Relay Wires to the MX2020 Craft Interface | 342
Disconnecting the Alarm Relay Wires from the MX2020 Craft Interface | 343
Connecting MPC or MIC Cables to the MX2020 Router | 344
Configuring the Junos OS Software | 347
Initially Configuring the MX2020 Router | 347
x
To Next Page
Loading...
