Unpacking the MX2020 Router
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate. The router chassis
is bolted to this pallet. Metal latches secure the top and bottom in place. Quick Start installation instructions,
large rack mount tray, pallet jack attachment, EMI covers, and a cardboard accessory box are also included
in the shipping crate. The total weight of the container including the router, FRUs, and accessories is
2,042 lb (926.23 kg).
NOTE: Depending on your configuration, the MX2020 may be shipped with additional
components already installed.
NOTE: The MX2020 can be ordered with extended EMI covers and extended cable managers.
There are two styles of shipping crates for the MX2020. Figure 80 on page 229 shows the smaller crate
that measures 85.0 in. (215.9 cm) high, 42.0 in. (106.7 cm) wide, and 48.0 in. (121.9 cm) deep.
Figure 81 on page 229 shows the larger crate that measures 87.6 in. (222.50 cm) high, 44.04 in. (112.8 cm)
wide, and 51.6 in. (131.06 cm) deep. If you are not sure which crate you have, plan for the larger crate.
The total weight of the shipping crate with router and accessories will vary depending on your configuration.
See “MX2020 Physical Specifications” on page 125 for MX2020 shipping weight specifications.
228
To Next Page
Loading...
Need help?
General
