Bus Revision 100
FPGA Revision 271
CB 1 status:
State Online Standby
IntakeA-Zone0 Temperature 30 degrees C / 86 degrees F
IntakeB-Zone1 Temperature 25 degrees C / 77 degrees F
IntakeC-Zone0 Temperature 39 degrees C / 102 degrees F
ExhaustA-Zone0 Temperature 33 degrees C / 91 degrees F
ExhaustB-Zone1 Temperature 28 degrees C / 82 degrees F
TCBC-Zone0 Temperature 31 degrees C / 87 degrees F
Power 1
1.0 V 1015 mV
1.2 V 1211 mV
1.8 V 1814 mV
2.5 V 2545 mV
3.3 V 3345 mV
5.0 V 5066 mV
5.0 V RE 5020 mV
12.0 V 12104 mV
12.0 V RE 12046 mV
Bus Revision 100
FPGA Revision 0
For further description of the output from the command, see the Junos OS System Basics and Services
Command Reference.
RELATED DOCUMENTATION
MX2000 Host Subsystem CB-RE Description | 49
MX2020 Component LEDs on the Craft Interface
Troubleshooting the MX2020 Host Subsystems | 681
Replacing an MX2000 SFB
1.
Removing an MX2000 SFB | 490
2.
Installing an MX2000 SFB | 492
489
To Next Page
Loading...
Need help?
General
