Juniper MX2020 - Maintaining and Verifying the Status of the MX2020 Craft Interface

SEE ALSO
Installing the MX2020 Craft Interface | 582
Removing the MX2020 Craft Interface | 581
Maintaining and Verifying the Status of the MX2020 Craft Interface | 589
Maintaining and Verifying the Status of the MX2020 Craft Interface
Purpose
Verify the system status of the craft interface.
Action
On a regular basis, check the status of the craft interface.
•
To display the status of the craft interface, issue the show chassis craft-interface command.
user@host> show chassis craft-interface
Front Panel System LEDs:
Routing Engine 0 1
--------------------------
OK * *
Fail . .
Master * .
Front Panel Alarm Indicators:
-----------------------------
Red LED *
Yellow LED *
Major relay *
Minor relay *
Front Panel FPC LEDs:
FPC 0 1 2 3 4 5 6 7 8 9
-----------------------------------------------------
Red . . . . . . . . . .
Green . . . . * . . * * .
Front Panel FPC LEDs:
FPC 10 11 12 13 14 15 16 17 18 19
------------------------------------------------------
Red . . . . . . . . . .
589