CHAPTER 16
Installing the Router
IN THIS CHAPTER
Removing Components from the MX2020 Router Chassis Before Installing it in a Rack | 245
Installing a MX2020 Router Using a Pallet Jack Overview | 258
Installing the Pallet Jack Attachment | 259
Installing the MX2020 Router Using a Pallet Jack with Attachment | 260
Installing a MX2020 Router Using a Router Transport Kit Overview | 265
Installing the Router Transport Kit on the MX2020 Router | 265
Securing the MX2020 Router to the Router Transport Platform | 268
Installing the MX2020 Router Using a Router Transport Kit | 270
Reinstalling Components in the MX2020 Router After Installing in a Rack | 277
Removing Components from the MX2020 Router Chassis Before Installing
it in a Rack
Before installing the router with a router transport kit, you must first remove shipping covers and
components from the chassis. With components removed, the chassis weighs approximately 429.6 lb
(194.86 kg).
CAUTION: The shipping covers help guide the chassis into the rack. Applying force
to any other part of the chassis can cause damage.
1.
Removing the Power Distribution Modules Before Installing an MX2020 Router | 246
2.
Removing the Power Supply Modules Before Installing an MX2020 Router | 248
3.
Removing the Fan Trays Before Installing an MX2020 Router | 251
4.
Removing the SFBs Before Installing an MX2020 Router | 253
5.
Removing the MPCs with Adapter Card Before Installing an MX2020 Router | 254
245
To Next Page
Loading...
Need help?
General
