Juniper MX2020 - Router Transport Kit Requirements

Figure 61: Turning Diameter of Router Transport Kit
42 in
(106.7 cm)
g000041
The weight of the router transport kit is 138.5 lb (63 kg). The maximum recommended height the MX2020
should be lifted from the floor using the router transport kit is 1.5 in. (3.8 cm).
Router Transport Kit Requirements
The side view measurements of the MX2020 router with the router transport kit installed is: 78.75 in.
(200 cm) high, 36.20 in. (91.95 cm) wide, and 23.40 in. (59.4 cm) high (see Figure 62 on page 144).
143