Juniper MX2020 - Tools and Parts Required to Unpack the MX2020 Router; Tools Required to Install the MX2020 Router Using a Pallet Jack

Tools and Parts Required to Unpack the MX2020 Router
To unpack the router and prepare for installation, you need the following tools:
•
Phillips (+) screwdriver, number 1, 2, and 3
•
1/2-in. or 13 mm open-end or socket wrench to remove bracket bolts from the shipping pallet
•
Blank panels to cover any slots not occupied by a component
RELATED DOCUMENTATION
Unpacking the MX2020 Router | 228
Unpacking the Router Transport Kit | 235
Verifying the MX2020 Parts Received | 232
MX2020 Universal Edge Router Overview | 3
Tools Required to Install the MX2020 Router Using a Pallet Jack
To install the router using a pallet jack with attachment, you need the following tools and equipment:
•
Standard pallet jack (not provided)
•
Pallet jack attachment—MX2000-PLLT-JCK-ADPTR
•
Front component shipping covers
•
Rear component shipping covers
•
Phillips (+) screwdrivers, numbers 1, 2, and 3
•
9/16-in. or 14 mm open-end or socket wrench to remove bracket bolts from the shipping pallet
•
ESD wrist strap
•
Antistatic mat
RELATED DOCUMENTATION
Overview of Preparing the Site for the MX2020 Router | 121
Removing Components from the MX2020 Router Chassis Before Installing it in a Rack | 245
Installing the MX2020 Router Using a Pallet Jack with Attachment | 260
223