CHAPTER 13
Installation Overview
IN THIS CHAPTER
Installing an MX2020 Router Overview | 221
Tools and Parts Required to Unpack the MX2020 Router | 223
Tools Required to Install the MX2020 Router Using a Pallet Jack | 223
Tools Required to Install the MX2020 Router Using a Router Transport Kit | 224
Tools and Parts Required for Connecting an MX2000 Router to Power | 224
Tools and Parts Required to Maintain the MX2020 Hardware Components | 225
Tools and Parts Required for MX2020 Router Connections | 226
Installing an MX2020 Router Overview
To install the MX2020 router:
1. Prepare your installation site. See:
•
Overview of Preparing the Site for the MX2020 Router on page 121
2. Review the safety guidelines. See:
•
General Safety Guidelines for Juniper Networks Devices
3. Unpack the router and verify the parts. See:
•
Unpacking the MX2020 Router on page 228
•
Verifying the MX2020 Parts Received on page 232
•
Unpacking the Router Transport Kit on page 235
4. Install the mounting hardware. See:
•
Installing the MX2020 Mounting Hardware for a Four-Post Rack or Cabinet on page 239
5. Remove all components. See:
•
Removing Components from the MX2020 Router Chassis Before Installing it in a Rack on page 245
6. Install the router into the rack. See:
221
To Next Page
Loading...
Need help?
General
