Juniper MX2020 - Tools and Parts Required to Remove Components from an MX2020 Router

Tools and Parts Required to Remove Components from an MX2020 Router
To remove components from the router or the router from a rack, you need the following tools and parts:
•
2.5-mm flat-blade (–) screwdriver, for detaching alarm relay terminal block
•
7/16-in. (11 mm) nut driver
•
Blank panels to cover empty slots
•
EMI (electromagnetic interference) covers—shipped with router
•
Electrostatic bag or antistatic mat, for each component
•
Electrostatic discharge (ESD) grounding wrist strap
•
Flat-blade (–) screwdriver
•
Pallet jack with attachment—recommended
•
Router transport kit—recommended (optional)
•
Phillips (+) screwdrivers, numbers 1, 2, and 3
•
Rubber safety cap for fiber-optic interfaces or cable
•
Wire cutters
RELATED DOCUMENTATION
Packing the MX2020 Router for Shipment | 728
Contacting Customer Support | 705
358