Table 98: Tools and Parts Required for Component Replacement (continued)
Tool or PartComponents
Phillips (+) screwdrivers, numbers 1 and 2
Rubber safety cap for fiber-optic MICs
Flat-blade (–) screwdriver
Electrostatic bag or antistatic mat
Blank panels (if component is not reinstalled)
MIC
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic discharge (ESD) grounding wrist strap
Blank panels (if component is not reinstalled)
Routing Engine and Control Board
(CB-RE)
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic discharge (ESD) grounding wrist strap
Blank panels (if component is not reinstalled)
SFB
Flat-blade (–) screwdriverSerial cable to Auxiliary or Console
Routing Engine port
Phillips (+) screwdrivers, numbers 1 and 2PSM air filters
Phillips (+) screwdrivers, numbers 1 and 2Middle card cage air filter
Phillips (+) screwdrivers, numbers 1 and 2Air filter (lower)
RELATED DOCUMENTATION
MX2020 Field-Replaceable Units | 19
Replacing the MX2020 Craft Interface
Replacing an MX2020 Fan Tray | 437
Replacing the MX2020 Air Filters
357
To Next Page
Loading...
