Reinstalling Components in the MX2020 Router After Installing in a Rack | 277
Tools Required to Install the MX2020 Router Using a Router Transport Kit
To install the router using a router transport kit, you need the following tools and equipment:
•
Router transport kit—MX2K-TRNSPRT-KIT
•
Front component shipping covers
•
Rear component shipping covers
•
Phillips (+) screwdrivers, numbers 1, 2, and 3
•
1/2-in. (12.7 mm) drive ratchet
•
1/4-in. (6.35 mm) torque-controlled driver or socket wrench to tighten the nuts on the router transport
kit
•
1-1/8-in. (28.57 mm) torque-controlled driver or socket wrench to tighten router transport kit winch
mechanism
•
9/16-in. or 14-mm open-end or socket wrench with extension to remove bracket bolts from the shipping
pallet
•
Electrostatic discharge wrist strap
•
Antistatic mat
RELATED DOCUMENTATION
Overview of Preparing the Site for the MX2020 Router | 121
Removing Components from the MX2020 Router Chassis Before Installing it in a Rack | 245
Installing the MX2020 Router Using a Router Transport Kit | 270
Reinstalling Components in the MX2020 Router After Installing in a Rack | 277
Tools and Parts Required for Connecting an MX2000 Router to Power
To provide power to the router, you need the following tools and parts:
•
Phillips (+) screwdrivers, numbers 1 and 2
•
2.5 mm flat-blade (–) screwdriver
224
To Next Page
Loading...
Need help?
General
