•
Review the maximum distance allowed for each cable. Choose the length of cable based on the
distance between the hardware components being connected. See:
•
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 149
•
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 151
10. Plan the cable routing and management. See:
•
MX2020 Cable Management Description on page 37
•
Maintaining Cables That Connect to MX2020 MPCs or MICs on page 529
RELATED DOCUMENTATION
MX2020 Universal Edge Router Overview | 3
MX2020 Site Preparation Checklist
The checklist in Table 35 on page 123 summarizes the tasks you must perform when preparing a site for
router installation.
Table 35: MX2020 Site Preparation Checklist
DatePerformed ByFor More InformationItem or Task
Environment
“MX2020 Router Environmental
Specifications” on page 137
Verify that environmental
factors such as temperature
and humidity do not exceed
router tolerances.
Power
“MX2020 DC Power
Distribution Module (-48 V)
Description” on page 107
“MX2000 DC Power
Distribution Module (240 V
China) Description” on page 109
Measure distance between
external power sources and
router installation site.
123
To Next Page
Loading...
Need help?
General
