Juniper MX2020 Hardware Guide

Table 35: MX2020 Site Preparation Checklist (continued)
DatePerformed ByFor More InformationItem or Task
“MX2000 Router Grounding
Specifications” on page 138
Locate sites for connection of
system grounding.
“MX2020 AC Power
Requirements” on page 167
“MX2020 DC Power
Requirements” on page 193
Calculate the power
consumption and
requirements.
Rack
“MX2020 Rack Requirements”
on page 130
“MX2020 Cabinet Size and
Clearance Requirements” on
page 133
Verify that your rack meets
the minimum requirements for
the installation of the router.
NOTE: There must be a
minimum of 45U of usable
rack space when installing the
MX2020 router into a 45U
rack.
“MX2020 Cabinet Size and
Clearance Requirements” on
page 133,
“MX2020 Rack Requirements”
on page 130,
“Clearance Requirements for
Airflow and Hardware
Maintenance for the MX2020
Router” on page 133
Plan rack or cabinet location,
including required space
clearances.
NOTE: If you are installing the
MX2020 router into a network
cabinet, make sure that no
hardware, device, rack, or
cabinet component obstructs
the 45U rack space from
access during installation.
“MX2020 Rack Requirements”
on page 130
If a rack is used, secure rack to
floor and building structure.
Cables and Transceivers
124

Juniper MX2020 Specifications

General

Brand	Juniper
Model	MX2020
Category	Network Router
Language	English