Juniper MX2020 - Tools and Parts Required for MX2020 Router Connections

Maintaining the MX2020 Power Supply Modules
Tools and Parts Required for MX2020 Router Connections
To connect the router to management devices and MPCs, you need the following tools and parts:
•
Phillips (+) screwdrivers, numbers 1 and 2
•
2.5-mm flat-blade (–) screwdriver
•
2.5-mm Phillips (+) screwdriver
•
Wire cutters
•
Electrostatic discharge (ESD) grounding wrist strap
RELATED DOCUMENTATION
Connecting the MX2020 Router to a Network for Out-of-Band Management | 333
Connecting the MX2020 Router to a Console or Auxiliary Device | 334
Connecting an MX2020 Router to an External Alarm-Reporting Device | 336
226