The MX2000 line of routers supports the following CB-RE’s:
•
RE-MX2000-1800x4 CB-RE
•
REMX2K-X8-64G-LT CB-RE
NOTE: REMX2K-X8-64G-LT CB-RE has limited encryption support.
RELATED DOCUMENTATION
RE-MX2000-1800x4 CB-RE Description | 50
REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Description | 54
Maintaining the MX2010 Host Subsystem
Maintaining the MX2020 Host Subsystem
Taking an MX2000 Host Subsystem Offline | 664
RJ-45 Connector Pinouts for MX Series CB-RE or RCB Auxillary and Console Ports
RJ-45 Connector Pinouts for an MX Series CB-RE or RCB Management Port | 156
RE-MX2000-1800x4 CB-RE Description
IN THIS SECTION
RE-MX2000-1800x4 CB-RE Front Panel | 51
RE-MX2000-1800x4 CB-RE Components | 52
RE-MX2000-1800x4 CB-RE Software | 53
RE-MX2000-1800x4 CB-RE Boot Sequence | 53
The RE-MX2000-1800x4 CB-RE runs Junos OS. Software processes that run on the CB-RE maintain the
routing tables, manage the routing protocols used on the router, control the router interfaces, control
some chassis components, and provide the interface for system management and user access to the router.
50
To Next Page
Loading...
